From: "Charles Johnston"
Date: Tue, 4 Dec 2001 07:45:07 -0700

Well, I checked your site, and noticed that others have had success
flashing, specifically that Max fellow who noticed that the SCSI ID
pins get reversed.  Well, I never noticed that because I have a full
SCSI chain and the new ID just conflicted with another and it appeared
to be not responding, when it was just a conflict on the SCSI chain.

The good news is, it didn't really kill my drive.  It just changed the
ID.  So, I cracked it open and swapped the jumpers and success!!!
I'll have time later to test it more (try out the audio functions).

Charles

> From: "Charles Johnston"
> Subject: A few words of caution about Jos Heemskerk's instructions...
> Date: Fri, 12 Oct 2001 08:28:28 -0600
> 
> I've been trying for a while to get audio firmware on my drive.
> It's a CTD-4004-HS (4324).  I read that e-mail you posted on
> your site from Jos Heemskerk about how he was able to flash his
> drive with audio firmware.
> 
> After I flashed with the 5.ac firmware my drive stopped responding.
> Not a big deal for me, because I was only keeping the drive around
> on the remote chance that I could get it to work with the audio
> firmware.  But, please post this for others who would rather not
> lose their drive.  I suppose it could be recovered if you pull the
> EPROM from the drive and flash it with the proper hardware.
> 
> Charles Johnston
> cjohnst@KILLALLSPAM.jps.net